• 4 channel amplifier
• Available in Black/Silver finishing
• Power Rating: 120 Watt per channel @ 4 Ohm < 1% THD+N
• Sn Ratio: > 74 dBA / >95 dBA (DDSP)  (ref: 1 Watt into 4 Ohm)

(*) VERY IMPORTANT NOTE – READ CAREFULLY
4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load
2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load
2 Ohm – MUSICAL SIGNAL – – pure resistive load or speaker load (only CH5)

SPECS:

Target powers:

• 120×4 Watt (Stereo) @ 4 Ohm
• 160×4 Watt (Stereo) @ 2 Ohm
• 320×2 Watt (BTL) @ 4 Ohm

Input sensitivity: (Power rating ref)

• 0.35V ÷ 12V (5.3V in DDSP mode) [CH1/2/3/4]

Xover functions:

• CH1/2= HP: 43 ÷ 500Hz(x1) or 430 ÷ 5000Hz(x10) [12 dB/oct – Q: 0.7]
• CH3/4= HP: 50 ÷ 200Hz & LP:(430 ÷ 5000Hz) [12 dB/oct – Q: 0.7]

Special features:

• Direct DSP (bypass all the preamplifier circuitry but the differential input interface)
• High Level / Low Level selectable input
• RTC input
• Internally controlled via Atmel Processor

Size:

• 235 x 205 x 55 mm

Weight:

• 2.4 Kg